Page 1 of 1
1/6 hetzer on bambulab H2s
Posted: Mon Oct 05, 2026 12:18 pm
by RowanB
Can the 1/6 Hetzer be printed on a Bambu Lab H2S without scaling it down? The model requires a 350 × 350 × 350 mm build volume, while the H2S has a 340 × 320 × 340 mm build volume. Would the Hetzer still fit, or would some parts need to be split?
Re: 1/6 hetzer on bambulab H2s
Posted: Tue Oct 06, 2026 7:36 am
by 50koruny
Hi,
i took a look at it and unfortunately, it won't fit.
To print on H2S, you would need to split at least three large parts.
- h2S.jpg (74.41 KiB) Viewed 34 times
Re: 1/6 hetzer on bambulab H2s
Posted: Wed Oct 07, 2026 8:42 am
by RowanB
Thanks for the info and the quick response!